User guide

If you are setting your Max basal rate after your basal rates have been set, you cannot set a Max basal that
is less than any of the programmed basal rates.
To set your Max basal rate, do these steps:
1 Go to the MAX BASAL RATE screen. The Max basal rate will be flashing.
Main > Basal > Basal Setup > Max Basal Rate
2 Change the rate and press ACT.
3 Your Max basal rate is now set. Exit the menus.
Example 1: Max basal
Helen has a very low insulin requirement. Her highest basal rate is only 0.400 units per hour. As a safety
measure, Helen's healthcare professional set her pump with a Maximum basal rate of 1.00 units per hour.
Example 2: Max basal
Rusty needs large amounts of insulin to control his blood glucose levels. His new pump was delivered from
the factory with a Maximum basal rate of 2.00 units per hour, but he needs 2.80 units per hour in the early
morning. Rusty will reprogram his Maximum basal to 3.00 units per hour to accommodate his needs.
Stopping your pump
Suspend stops all insulin delivery, including the current basal and any bolus or Fill Cannula deliveries that
are in progress. While suspended, your pump will not deliver insulin until you resume your pump. When you
resume your pump, the basal delivery will continue.
The pump will beep or vibrate about every 15 minutes on the hour to remind you that it is not delivering
insulin. Example: You suspend your pump at 11:20. The pump will beep/vibrate at 11:30, 11:45, 12:00, and
so on until you resume your pump (basal resumes).
Basic programming58