User guide

When the BG Reminder goes off, your pump will beep or vibrate and CHECK BG will appear on the screen.
Your pump will beep or vibrate periodically until it is cleared (ESC, ACT).
When you set a BG Reminder after a bolus, the STATUS screen will
show the amount of time remaining before the reminder goes off.
Here, the STATUS screen indicates that the BG Reminder will go off
in 18 minutes.
Capturing Events
The Capture Event feature electronically saves certain types of information. Some examples include:
• Blood glucose (BG) measurements
• The amount of insulin you use
• The amount of carbohydrates you eat or drink
• The exercise you do
• Other (this can be used for anything else as needed)
Make sure that you enter events when they happen since the system records the time of the entry. You cannot
change entries after you have put the information into your device. The entered information can be sent to
Medtronic CareLink
®
Personal software. Here it can be used to generate treatment reports that you can share
with your healthcare professional. You can view up to 10 of the latest saved events in the CAPTURE HISTORY
screen.
Turning on the Capture Event feature
The Capture Events option appears in the MAIN MENU after this feature has been turned on in the UTILITIES
MENU.
To turn on the Capture Event feature, do these steps:
1 Go to the CAPTURE EVENT ON/OFF screen:
Main > Utilities > Capture Option
2 Select On, then press ACT.
You will now have a Capture Event option in the MAIN MENU.
Basic programming 49
Chapter 4