User guide

When the pump is in Attention mode, it will beep or vibrate periodically to remind you of the condition. The
beep or vibrate frequency varies depending on the condition that put the pump in Attention mode. Refer to
the Alarm conditions section in the Troubleshooting, alerts and alarms chapter for alarm conditions that will
trigger the Attention mode. See the Stopping your pump section in the Basic programming chapter to learn
about Suspend mode.
Menus
The MAIN MENU is the highest level menu. There are submenus, functions, status and programming screens
in the lower menu levels. The menus are described in the following paragraphs.
Tip: If a screen item is flashing (blinking), during programming, press or to change the value.
MAIN MENU
Highest menu level in the menu system. When you press ACT from the HOME screen, the MAIN MENU will
appear.
BOLUS MENU
Contains the settings and functions for bolus deliveries. The button allows direct access to MANUAL BOLUS
or to the BOLUS WIZARD feature without having to navigate through the menus. Refer to the Basic
programming chapter for the manual bolus information or to the Using the Bolus Wizard feature chapter for
bolusing using the Bolus Wizard feature.
SUSPEND
Stops all current insulin deliveries. Refer to the Stopping your pump section in the Basic programming chapter
for more information.
SENSOR
Contains the functions to setup the interface between the sensor and the pump and access to the pump's
sensor features.
The basics 33
Chapter 3