User guide

Scroll bar
If there is more text than the screen can show, a scroll bar appears on
the right side of the screen. Press
to view any additional text.
Screen backlight
When you press from the HOME screen, the light on the screen turns
on or off. During programming, the backlight can be turned on by
pressing the
and the together. The light will stay on while you are pressing any of the pump buttons.
It will stay on as long as the current screen is active.
To conserve your battery, the backlight will turn off automatically while the pump is vibrating. After the
vibration is finished, the light will turn back on. The backlight cannot be turned on in a low or dead battery
condition.
Beep/vibrate
Your pump will beep or vibrate to indicate activity. Refer to the Setting your alert type section in the Utilities
chapter for setup instructions.
Operating modes
The screen lets you know when a special feature is active or if there is a condition that needs your attention.
The active features and pump status will determine the operating mode. The screens for the three modes
are shown in the following sections.
scroll bar
The basics 31
Chapter 3