User guide

Time display
The current time of day is displayed across the top of the pump screen in the
format you select—12-hour or 24-hour. The AM or PM is only displayed for the 12-
hour format. For instructions on setting the time on your pump, see the Setting
the time and date section in the Basic programming chapter.
Reservoir volume
The reservoir volume icon tells you how much insulin is in your pump. This icon is also
divided into four segments. Each segment represents approximately 25 percent of the
reservoir volume you have left. This allows you to be aware of how much insulin you
have left in your pump. Refer to your STATUS screen to view the number of units left
in the reservoir.
NOTE: For the Paradigm 754 pump, your reservoir icon will only appear full if using
a filled 300–unit Paradigm reservoir. The icon will not appear full if you use the 176–
unit Paradigm reservoir.
Alert and alarm icons
An open circle (alert) or a solid circle (alarm) are displayed in the upper part of
your pump screen only when there is an alert or alarm condition on your pump. For
alarm and alert information, see the Troubleshooting, alerts and alarms chapter.
Sensor icons
A dark sensor icon means that the sensor is on and the pump is receiving
sensor data. A light-colored sensor icon with a dark circle around it means
that the sensor is on, but the pump is not receiving sensor data. For
information about the sensor, see the Sensor features chapter.
Time Display
24-Hr
12-Hr
Less than 25% left
75 to 100% left
Alarm icon
Alert icon
Sensor is on and the pump
is receiving sensor data
Sensor is on but the pump
is not receiving sensor data
The basics30