User guide

Item When What
BG Reminder*
(Only if enabled)
Time remaining before BG Reminder is set to go off H:MM h
(if less than 1 hour, 0:XXh where XX is minutes remaining)
Block
(if active) ON
Current date (always appears)
Current temp basal
information
(if active) rate (units per hour), duration, time
remaining
Last alarm/alert (if cleared within 24 hours) (Last:) with the date, time and
abbreviation for the most recently
cleared alarm/alert
Last bolus information (appears if at least one bolus
was started)
type and units delivered
delivery time and date
(S = Square, N = Normal, DN = Normal
part of dual wave bolus, DS = Square part
of dual wave bolus)
Meter: Disabled (appears if enabled but battery is low or empty)
Meter: On
(appears if enabled)
Missed Bolus Reminder (if this feature is turned on) Bolus Before and the time that the
reminder is due
Pump model number (always appears)
Remote: Disabled (appears if enabled but battery is low or empty)
Remote: On
(appears if enabled)
Reservoir started (always appears) date, time, units left, time left
Serial number (always appears)
Sensor Demo (if Demo Mode is selected for
the sensor graphs)
SENSOR DEMO: On
Software version (always appears)
Standard basal delivery data (always appears) current basal rate (basal 1, basal 2, etc.)
Status of pump (such as Rewind, Suspended, Low Reservoir, Set Time, and so on)
Pump specifications 205
Chapter 15