User guide

NOTE: The STATUS screen shows any alarms and alerts that are active.
Question: Why are alarms important?
Answer: Your pump monitors activities and notifies you if there is an unusual pump status or your attention
is required. When an attention alarm is active, INSULIN DELIVERY IS STOPPED and immediate operator
interaction is required.
If the vibrate mode is on, all alarms and alerts start as vibrations and then change to beeps. For your safety,
if there is no response after 10 minutes, the beeps change to a siren. The siren continues every minute until
the alarm is cleared.
What to do
When an alarm is triggered, the pump goes into Attention mode and an alarm message shows on the screen.
The pump then defaults to the HOME screen. Do these steps when you get an alarm:
1 View the alarm: From the HOME screen, press any button to see the alarm message.
2
Read all of the alarm text. There are instructions on how to fix the alarm condition. (Press
to read
more text, if available.)
3 Clear the alarm. Press ESC then ACT after you read the alarm instructions.
4 The HOME screen appears.
5 Follow the instructions that appeared with the alarm to fix the alarm condition.
6 Check your settings. Check your time, date, basal and other settings to make sure they are correct.
Troubleshooting, alerts and alarms184