User guide

MISSED BOLUS
Reason: You have not delivered a bolus during the time period you specified in the Missed Bolus Reminder
feature.
Action: Set a meal bolus if needed.
LOST SENSOR
Reason: The pump has not received a signal from the transmitter. Do not disconnect the transmitter from
the sensor.
Action:
1 Make sure that the sensor is inserted correctly.
2 Check the REVIEW SETTINGS screen to make sure that the transmitter ID entered into the pump matches
the ID on your transmitter:
Main > Sensor > Review Settings
3 Check the transmitter and sensor connection. Touch the inserted sensor at the back of the assembly to
prevent movement and push the transmitter firmly:
a. If you hear a click, wait 20 seconds and look for a green light on the transmitter flash for 10 seconds
to confirm a good connection. If you see the green light, the alert was due to the transmitter and
the sensor not being connected.
b. If you hear a click, but do not see a green light on the transmitter, check to make sure that the
transmitter is charged.
c. If you do not hear a click when you check the connection, the alert was due to a transmission
problem. Bring the pump closer to the sensor and transmitter.
4 Use the Find Lost Sensor function to find your sensor (see the Troubleshooting sensor features section
in this chapter):
Main > Sensor > Link to Sensor > Find Lost Sensor
LOW TRANSMTR
Reason: Occurs when the transmitter battery is close to running out of power. This alert will repeat daily at
noon while this condition exists. The transmitter will continue sending sensor signals for several hours and
may last for several days until the battery becomes depleted. Be prepared to recharge your transmitter
immediately when its battery becomes depleted.
Troubleshooting, alerts and alarms180