User guide

Clearing the settings
Take the following steps only if you want to clear your pump to factory default settings.
WARNING: Do not clear your pump settings while it is connected to your body.
CAUTION: Do not clear your pump settings unless directed by your healthcare professional or a Medtronic
Diabetes representative. If you clear your pump settings, it will be necessary to reprogram all your
personal pump settings as directed by your healthcare professional. Additionally, you will have to rewind
your pump.
1 Go to the UTILITIES MENU screen and select User Settings.
Main > Utilities > User Settings
2 Hold down
and press ACT.
3 The USER SETTINGS screen is displayed. Select Clear Settings, then press ACT.
4 A CONFIRM message displays, giving you the option of clearing your pump settings or not. Select YES and
press ACT to clear the settings. You can press ESC if you want to cancel.
5 You will see a RESET screen, and then the pump will go through various screens while it restarts. After
the pump clears all of your settings, the screen will go to the TIME/DATE SETUP screen.
6 Reset the time and date as described in Setting the time and date section in the Basic programming
chapter.
7 After you set the time and date, you must rewind your pump. Refer to the Rewinding your pump section
in the Starting on insulin chapter for instructions. Remember, all your settings have been cleared and
you must either restore or reprogram all your settings.
History
If you want to view a listing of the dates and times of all recent User Settings operations you have done
on your pump, such as saves and restores, take the following steps:
1 Go to the UTILITIES MENU screen and select User Settings.
Main > Utilities > User Settings
2 Hold down
and press ACT.
3 The USER SETTINGS screen is displayed. Select History, then press ACT.
4 The SETTINGS HISTORY screen displays, giving you a list of all the dates and times of your most recent
User Setting operations. Scroll down to view the entire history. When you are done looking at the history,
press ESC to exit the menu.
Utilities168