User guide

Saving the settings
Do these steps to save your current pump settings:
1 Go to the UTILITIES MENU screen and select User Settings.
Main > Utilities > User Settings
2 Hold down
and press ACT.
3 The USER SETTINGS screen is displayed with Save Settings highlighted. Press ACT.
4 If this is the first time you have saved pump settings, go to step 5. If you have previously saved pump
settings, a message displays, indicating the date of your last pump settings save. Read the instructions
on the screen, then press ACT to save your current settings. You can press ESC if you want to cancel the
save.
5 The SETTINGS SAVED message displays to confirm that your current pump settings have been saved. Exit
the menus.
Restoring the settings
Do these steps to restore the most recent pump settings you have saved to your pump:
1 Go to the UTILITIES MENU screen and select User Settings.
Main > Utilities > User Settings
2 Hold down
and press ACT.
3 The USER SETTINGS screen is displayed. Select Restore Settings, then press ACT.
4 A message displays, giving you the option of restoring the pump settings that were saved on the given
date and erasing the ones currently on your pump. Read the instructions on the screen then press ACT
to restore the settings. You can press ESC if you want to cancel the restore.
5 The SETTINGS RESTORED message displays to confirm that your current pump settings have been replaced
with the pump settings you had saved on the given date. Exit the menus and check your pump settings
to verify the restore.
Utilities 167
Chapter 10