User guide

3 Periodically, you will hear beeps as different mechanisms in the pump are being tested. As part of the
selftest, the pump will do these tests:
a. Screen Test:
The screen will appear all black.
b. Selftest:
The pump will count down from 10.
c. Tone Test:
You should hear beeps.
d. Vibrate Test:
You will feel vibrations.
4 After the selftest is finished, TEST COMPLETE screen appears. The screen will return to the UTILITIES
MENU, then to the HOME screen.
User settings
The user settings function allows you to save, restore, and clear all pump settings. You can also view a listing
of the dates and times of all recent user settings operations you have done. The Save Settings feature lets
you keep a set of pump settings that you can restore to your pump if it is cleared or you need to go back to
these settings for any reason.
When you clear your pump, the pump settings are restored to the factory defaults, and you must either use
Restore Settings, if you have saved a set of pump settings, or reprogram all your settings before you can use
your pump again. The pump does not clear the internal pump memory.
WARNING: Do not clear your pump settings while it is connected to your body.
CAUTION: Do not clear your pump settings unless directed by your healthcare professional or a Medtronic
Diabetes representative. If you clear your pump settings, it will be necessary to reprogram all your
personal pump settings as directed by your healthcare professional. Additionally, you will have to rewind
your pump.
Utilities166