User guide

Utilities
Alarm review
You can review alarms and their details in the ALARM HISTORY screen. This screen shows up to 36 past alarms,
errors, or LOW RESERVOIR and LOW BATTERY alerts.
1 Go to the ALARM HISTORY screen.
Main > Utilities > Alarm > Alarm History
2 Scroll through your past alarms.
3 In the ALARM HISTORY screen, select the alarm you want to review and press ACT. The details for that
alarm will appear on the screen.
4 Press ESC to return to the ALARM HISTORY screen. Select another alarm to review, or exit the menus if
you are done.
Setting your alert type
You can select the type of alert your pump uses (for alarms, special conditions and programming). You can
select a vibrate (silent) alert, or an audible beep alert. There are three beep types: long, medium and short
tones. The factory setting for this feature is beep-medium.
The vibrate alert type is disabled if you use the block feature, and vibrate must be set again once block is
turned off. Vibrate uses more battery power than the beep alert type and may shorten battery life. If your
alert type is set to vibrate and you get a LOW BATTERY alert, your pump will use the beep alert type instead
to conserve battery power.
1 Go to the ALERT TYPE screen.
Main > Utilities > Alarm > Alert Type
2 Select your alert type and press ACT. That alert type is now active. Exit the menus.
Utilities 153
Chapter 10