User guide

WARNING: If bleeding occurs, apply steady pressure using sterile gauze or clean cloth for up to 3
minutes.
11 Straighten the sensor adhesive tab so that it lies flat against the skin.
12 While holding the sensor in place, gently lift the adhesive tab. Carefully remove the bottom piece of
white paper from under the adhesive pad. Press the adhesive against your skin.
13 Before connecting the device, apply overtape. Do not cover the sensor connectors or adhesive tab
with overtape.
Adhesive tab
Sensor connectors
14 Follow the directions in the next section for connecting the transmitter to the sensor.
Sensor features 135
Chapter 8