User guide

9 To insert the sensor, complete the following four steps:
A Press the button in
and then release.
A B C D
B Wait 5 seconds to
allow adhesive time
to stick to skin.
C Press and hold in the
button.
D While holding the
Serter button in, lift
the Serter away from
the skin.
10 If you inserted the sensor into yourself, complete step A. If you are a healthcare professional or caregiver
who inserted the sensor into a Patient, complete step B.
A Gently hold the base of the sensor against
skin. Hold the needle housing at the top and
slowly pull straight up, away from the sensor.
B Wrap sterile gauze around the sensor (as
shown in image B). Gently hold the base of the
sensor against skin. Hold the needle housing
at the top and slowly pull straight up, away
from the sensor.
A
B
Healthcare professional or caregiver:
Patient:
Sensor features134