User guide

Setting the sensor glucose graph timeout
The sensor glucose graph timeout is how long the graphs show on the pump screen until the HOME screen
automatically appears. The default timeout is two (2) minutes, and you can set it for 2, 4, or 6 minutes.
Using a continuous graph display
You can also select NONE to set the sensor graph timeout to display continuously. If you select NONE, the
sensor graphs will show until another screen or menu is selected, or an alarm/alert occurs. Selecting
continuous graph display uses more battery power and decreases battery life. To return to the HOME screen
from the sensor glucose graphs, press ESC until the HOME screen appears.
To set the sensor glucose graph timeout:
1 Make sure the EDIT SETTINGS screen is open.
Main > Sensor > Edit Settings
2 Select Graph Timeout, then press ACT. The SET GRAPH TIMEOUT screen flashes the default time of
2 minutes (0:02).
3 Select your Graph Timeout. The time you select must be: 2 minutes; 4 minutes; 6 minutes; or NONE.
4 Press ACT. The EDIT SETTINGS screen shows the Graph Timeout you selected.
You are now ready to review your sensor glucose monitoring settings.
Reviewing your settings
Make sure that all the settings you have made are correct before you use the system. Use the following
procedure to review your settings:
1 Open the REVIEW SETTINGS screen.
Main > Sensor > Review Settings
2
Press
to scroll through all settings to make sure that they are correct.
3 To change any settings, return to the EDIT SETTINGS menu.
Main > Sensor > Edit Settings
4 Save your settings after you have set your preferences. This will allow you to restore the settings you
have saved if you receive an alarm or error that resets your settings.
Sensor features128