User guide

Sensor features
The optional sensor and transmitter can provide continuous glucose measurements to help you control your
glucose levels better. The sensor measures the glucose levels in the fluid under your skin. The transmitter
receives this measurement from the sensor and sends it wirelessly to the pump. To take advantage of your
pump sensor features, contact your local representative to purchase your sensor and transmitter.
Entering your sensor settings
Enter your pump sensor settings in the order they appear below, as some of the settings are dependent upon
other settings being made first. When you complete each setting, your pump will automatically display the
screen for the next setting in the sequence. When a screen item flashes, you may change the value of the
flashing item by pressing or .
Turning on the sensor
The sensor must be turned on, started and initialized to report glucose measurements.
1 Go to the EDIT SETTINGS screen.
Main > Sensor > Edit Settings
The EDIT SETTINGS screen appears with Sensor: Off selected.
2 Press ACT. The SENSOR ON/OFF screen appears.
3 Select On, then press ACT. The EDIT SETTINGS screen appears showing the sensor is now turned on.
You are now ready to turn on the glucose alerts.
Sensor features 117
Chapter 8