User guide

Verifying temp basal delivery
Temporary basal information is available in the STATUS screen only.
During a temporary (temp) basal, the pump is in Special mode (an open circle appears). This open circle will
remind you that a temp basal is active. Additionally, your pump will beep/vibrate three times every hour
during delivery. During delivery, go to the STATUS screen to see the current temp basal information.
Press down button
to scroll
Tem p B as a l o f
0.6 units per hour
is now active
Temp Basal delivery
will last 30 minutes
4 minutes remaining
before Temp Basal
delivery is finished
Regular programmed
basal rate will
resume after the
Temp Basal delivery
is finished
Canceling a temp basal
Use the Cancel Temp Basal function in the BASAL MENU to cancel a temporary basal. This function
immediately stops the temp basal and resumes the regular programmed basal delivery.
To cancel a temp basal, do these steps:
1 Go to the BASAL MENU.
Main > Basal
2 Select Cancel Temp Basal, then press ACT.
The screen will return to the BASAL MENU. Your temp basal is cancelled and open circle has disappeared
from the top of the screen. The programmed basal is now active again. Exit the menus.
Optimizing pump therapy 113
Chapter 7