User guide

Add, delete, review meter IDs
The meter programming screens are very similar to those for the remote control. Make sure to select Meters
in the DEVICE OPTIONS screen when programming your meter.
You have to turn on the meter option to add, delete, or review the meter ID(s) programmed in your pump.
To turn on the meter option:
1 Go to the METER OPTION screen.
Main > Utilities > Connect Devices > Meters
2 Select On, then press ACT. The METER ID MENU appears.
3 Add, delete or review your meter ID(s) as desired.
Adding meter IDs
a. Select Add ID, then press ACT.
b. Use the up and down arrow buttons to enter each of the six ID characters. Press ACT after each
entry.
c. After you set the last character of the ID, the screen will return to the METER ID MENU.
Deleting meter IDs
a. Select Delete ID, then press ACT.
b. Select the meter ID that you want to delete and press ACT.
c. The selected ID is now deleted.
Reviewing meter IDs
If you are not sure that your meter ID is entered in your pump, check the REVIEW METER ID screen.
a. Select Review ID, then press ACT.
b. The programmed IDs will show in the REVIEW METER ID screen.
4 Exit the menus when you are done.
Normal bolus using Bolus Wizard feature
After the Bolus Wizard feature is turned on and programmed, this feature can calculate an estimate of insulin
you need for your correction bolus and/or your food bolus. You have the option of using the estimate or
changing it as necessary. Additionally, your pump can receive your blood glucose reading from the meter, if
they are linked.
Using the Bolus Wizard feature 87
Chapter 6