User guide

9 Press ACT. The SET START TIME 3 screen appears. The second insulin sensitivity is now set.
10 If you do not need to set up any more insulin sensitivities, press ESC. If you need to set up more insulin
sensitivities, repeat steps 6 through 9 above for each insulin sensitivity.
You are now ready to set up the BG Target.
Setting the BG Targets
The BG Target setting allows you to set glucose targets. The Bolus Wizard will use these targets to calculate
a correction dose. Because the targets may vary throughout the day, your pump allows you to set up to eight
BG Targets each day. If you want to set just one target value, instead of a range, set both the low and high
values to the same number.
If your current BG is above the BG Target range, the Bolus Wizard feature may calculate a correction dose.
The correction dose will deliver enough insulin to bring your BG down to your current high end of the BG
Target range. If your current BG is below the BG Target range, the Bolus Wizard may calculate a negative
correction and subtract it from your food bolus. This will bring your BG to the low end of the BG Target range.
Example:
Glucose Concentration
22.2
13.9
5.6
3.8
400
250
100
70
mmol/L mg/dL
Correct down to the high
end of 5.6 mmol/L
Correct up to the low end of
3.8 mmol/L
Target Range
Using the Bolus Wizard feature 83
Chapter 6