Technical data
57
Fig. 60 - SS MAIN
(set for Run Timer)
When the SS is set for Timer, the graphic TMR with Run Time
counting up from 0:00 to 9:59 (min:sec) then 10 to 999 (min)
will be displayed (Fig. 60) instead of a set Stop Depth/Time.
• A (< 2 sec) to access Dive ALTs**.
• S (< 2 sec) to acknowledge alarms and activate Backlight.
• S (< 2 sec) to start/stop Timer, blocked when pressed to
acknowledge/silence alarms.
• S (2 sec), when Timer is stopped, to reset it to 0:00,
blocked when pressed to acknowledge/silence alarms.
** SS features up to 3 ALT displays which are similar to the No Deco
Main, ALT1, and ALT2 displays, respectively.
DECOMPRESSION
Decompression mode activates when theoretical No Decompres-
sion time and depth limits are exceeded.
Upon entry into Deco, the audible will sound and the alarm LED
will flash. The full TLBG and Up Arrow icon will flash (Fig. 61)
until the audible is silenced.
• S (< 2 sec) to silence Audible.
> Once within 10 FT (3 M) below the required Stop Depth
(stop zone), the full Stop icon (both Arrows with Stop Bar)
will be displayed solid.
Fig. 61 - DECO ENTRY
(during audible)