Technical data

36
Set Deep Stop (DS), information includes (Fig. 29):
> Graphics SEt and DS with DS and Stop arrow/bar icons
> Set Point ON (or OFF) flashing
• A (< 2 sec) to toggle Set Points.
• S (< 2 sec) to save the setting and access Set SS.
• S (2 sec) to revert to Set Units.
Set Safety Stop (SS), information includes:
> Graphic SEt with Stop arrow/bar icons
> Graphic SS with Set Point ON (or OFF) flashing, or graphic
TMR with ON flashing
• A (< 2 sec) to step forward through the Set Points (SS OFF,
SS ON, TMR ON.
• S (< 2 sec) to save the setting.
• S (2 sec) to revert to Set DS.
>> If SS OFF (Fig. 30A) or TMR ON (Fig. 30B) is selected,
operation will access Set Algorithm.
>> If SS ON is selected (Fig. 30C), Stop Depth and Time is
displayed with the min and sec icons, Time flashing.
• A (< 2 sec) to toggle Time Set Points between 3:00 and
5:00 (min:sec).
Fig. 29 - SET DS
Fig. 30A - SET SS OFF
Fig. 30B - SET SS TIMER