Installation guide

E - 8
Monitor
CONTROL REFERENCE GUIDE
Installation of Monitors
• Use supplied mounting straps to install the monitors onto the seat back in a car.
2) Tightly wrap the mounting
strap around the headrest.
SAFETY WARNING!
• This unit should never be used by the vehicle's driver or left unsecured in the vehicle while driving.
• If this unit is being used in your vehicle, be sure that it is secured or held safely, and does not obstruct
any safey device, including air bags or seat belts.
• All passengers should wear seat belts when using this unit in a moving vehicle.
• If in doubt, please contact your vehicle manufacturer for further advice.
1) Loop the safety band
around the headrest.
1) DC IN 12V jack
2) POWER ON/OFF switch
3) POWER indicator
4) VIDEO IN / AUDIO IN (AV1) jacks
5) AV1 / AV2 switch
6) AV2 (EZ VIEW CABLE) socket
Connect to main unit port (Input)
7) Headphone / Earphone jacks
8) BRIGHTNESS control
Adjust the relative lightness or darkness of
the color.
9) COLOR control
Adjust for color intensity.
10) SCREEN switch
16:9 Wide-screen
4:3 Pan screen
11) Remote sensor
Receives the remote control unit signals
12) VOLUME control
Adjust the volume.