User manual

REMOVING THE BASE STAND
WARNING: The LCD display is very fragile, and must be >rotected at all times when removing the base
stand. Be sure that no hard or sharp objects, or anything that could scratch or damage the LCD display,
come in contact with it. Do NOT place pressure on the rear of the unit at anytime because the screen
could crack.
1. Disconnect any cables or
cords connected to the unit. ii
2. Lay the unit down on a flat _ ii
surface, so the back side is I_ ii
[
]
facing up, making sure to .' Ei,, J,,
e ii
place a soft cushioned '_:_
material (such as a blanket i, ..
or thick piece of foam) ii [
: El i,
beneath the screen. . ,,
3. Remove the 8 screws and
then remove the BASE
STAND from the unit.
MOUNTING ON THE WALL
This unit is VESA-compliant, and is designed to be wall-mounted with a VESA-compliant 7.9" x 3.9"
(200ram x 100ram) mounting kit designed for flat-panel TVs (sold separately). Mount this unit according
to the directions included with the mounting kit.
NOTE
Remove the base stand before mounting the unit on the wall.
7,9 _
! !
! i ,
! i =
! i
•e-. $
Six mounting
holes
E- 15