User manual

CONNECTING A HIGH-DEFINITION (HD) SOURCE
High-Definition (HD) Devices with component video output must be connected to the YUV input.
Connect the component video cable and audio cable (not included) as shown.
Make sure you connect the component video cable and audio cable from the other equipment
(COMPONENT VIDEO OUT and AUDIO OUT) to this unit (COMPONENT VIDEO IN and AUDIO IN - YUV
IN).
f .osou.cE 1
| With component video output
/(Digital Cable Box*, Satellite Receiver*,_
ToAUDIO [ orexternalover-the-airHD-Tuner). ,_
IN jacks
(YUV IN) ToAUDIO
OUT jacks
L=:::L
* May require a subscription
for receiving HD
channels. Check with
your cable/satellite service
provider for details.
To
COMPONENT ToCOMPONENT
VIDEO tN jacks VIDEO OUT jacks
(YUV IN)
NOTE
When connecting a DVD player to the television, the picture resolution is solely dependent upon the
resolution supported by the DVD player attached. DVD player resolutions vary from 480i to I080i, and
this unit can support DVD players up to a maximum resolution of 1080i.
CONNECTING A PC
Connect the 15-pin D-S UB PC/VGA connector from your computer to the 15-pin D-SU B PC/VGA input on
this unit using a monitor cable and audio cable (not included) as shown.
Make sure you connect the
cable from the computer (PC
Connector and AUDIO - PC
OUT) to this unit (MONITOR /
VGA and AUDIO - PC IN).
& To AUDIO jack (PC OUT)
Im_To PC connector
E- 12