Instruction manual

17
TV MENU (For TV Mode Only)
1. Press the MENU button.
2. Use the
or button to select TV. Press the ENTER or button to go into the TV settings.
3. Use the
or button to select the options (TunerMode, Auto Scan, Auto Scan AddCH, ChannelSkip, MTS
or AudioLanguage). Adjust them using the
or button (The screen will change to your desired setting); or
press the ENTER or
button to go into the detailed settings.
4. Press the EXIT button to return to the previous menu.
5. Repeat steps 3 and 4 to adjust other options.
6. To exit the MAIN MENU and return to the normal screen, press the EXIT button repeatedly.
TunerMode : Antenna (over-the-air broadcasts, Ch 2-69) or Cable (cable/satellite broadcasts, CH 1-135)
mode is available.
Auto Scan : Searches for usable stations and stores them in memory.
AutoScanAddCH : Searches for more usable stations and adds them in memory (The stations stored before
are still kept).
ChannelSkip : Skips weak channels and the channels you do not like.
MTS : Select from Stereo / SAP (Secondary Audio Program) / Mono.
AudioLanguage : Select from English / Spanish / French (Available for digital channels if multiple audio
languages are broadcasted).
NOTE
The SAP (Secondary Audio Program) feature allows a TV station to broadcast other information, which could be
audio in another language.
ChannelSkipSetting:
1. Use the or button to select a channel. Press the button to select the last channel of the page, press
again to go to the next page. Press the
button to select the rst channel of the page, press again to go to
the previous page.
2. Press the ENTER button to shift between skip or not skip the channel. A check appears in the square. It means
to skip the channel. The channel will not appear when you press the CH
/CH Button.
TV SETUP