Instruction manual
11
CONNECTING A HIGH-DEFINITION (HD) SOURCE
High-Deînition (HD) Devices with component video output must be connected to the YUV input.
Connect the component video cable and audio cable (not included) as shown.
Make sure you connect the component video cable and audio cable from the other equipment (COMPONENT
VIDEO OUT and AUDIO OUT) to this unit (COMPONENT VIDEO IN and AUDIO IN - YUV IN).
* May require a subscription for
receiving HD channels. Check with
your cable/satellite service provider
for details.
NOTE
When connecting a DVD player to the television, the picture resolution is solely dependent upon the resolution
supported by the DVD player attached. DVD player resolutions vary from 480i to 1080i, and this unit can support
DVD players up to a maximum resolution of 1080i.
CONNECTING A PC
Connect the 15-pin D-SUB PC/VGA
connector from your computer to
the 15-pin D-SUB PC/VGA input
on this unit using a monitor cable
and audio cable (not included) as
shown.
Make sure you connect the cable
from the computer (PC Connector
and PC AUDIO) to this unit (PC IN
MONITOR / VGA and AUDIO).
To PC AUDIO OUT jack
To PC connector
To COMPONENT
VIDEO OUT jacks
To COMPONENT
VIDEO IN jacks
(YUV IN)
To AUDIO
IN jacks
(YUV IN)
CONNECTIONS