Instruction manual

9
CONNECTING A TV ANTENNA / CABLE / SATELLITE
To view television channels correctly, a signal must be received from one of the following sources:
- An indoor or outdoor aerial antenna
- A cable system
- A satellite system
ConnectingaDigitalAntenna
The tuner in this TV receives ATSC TV signals from an antenna.
This digital TV can receive standard (SDTV) and high denition (HDTV) over the air broadcasts.
ConnectinganAnalogAntennaorDevice
The tuner in this TV receives NTSC TV signals, analog cable signals or the RF output from a satellite receiver, VCR
or cable box.
CONNECTING AN A/V DEVICE
To connect to other equipment such as a VCR, camcorder, satellite system or cable, etc.
ConnectingtoaVCR/Camcorder/SatelliteSystem/Cable
Connect the AUDIO and S-VIDEO cable (not included) as shown:
Make sure you connect the cable from the other equipment (AUDIO OUT and S-VIDEO OUT) to this unit AV IN 1
(AUDIO IN and S-VIDEO IN).
NOTE
Please refer to the user manual
for the other equipment for more
information.
To S-VIDEO
OUT / AUDIO
OUT jacks
To S-VIDEO
IN jack
To AUDIO
IN jacks
(AV IN 1)
Satellite, cable or TV
antenna cable to TV
ANTENNA terminal
(cable not included)
CONNECTIONS