User Manual

4
Solo RA1-35/50/60-9R (V.2)
www.ventilation-system.com
DELIVERY SET
DESIGNATION KEY
PURPOSE
The ventilator is designed to ensure continuous mechanical air exchange in flats, cottages, hotels, cafés and other domestic and public
premises. It is equipped with a regenerator that enables supply of fresh filtered air heated by means of extract air heat energy recovery.
The ventilator is designed for installation on external walls and is rated for continuous operation
NAME NUMBER
Solo RA1-35-9 R Solo RA1-35-9 R V.2; Solo R1-50-9 R V.2;
Solo R1-60-9 R V.2
Ventilator 1 pc. 1 pc.
Remote control – 1 pc.
Plastic screwdriver – 1 pc.
Mounting plate 1 pc. 1 pc.
Foam wedges
1 set 1 set
Spare polyurethane foam 1 pc. 1 pc.
User’s manual 1 pc. 1 pc.
Packing box 1 pc. 1 pc.
Solo R A 1 35 L07 -9 R V.2
Control method
_ – pull-cord switch
V.2 – remote control
Additional options
R – power cord
Ventilation hood type
7 – MVMO 100 bV1sAn round metal grille
9 – MV102 V plastic ventilation hood
Duct length [mm]
_ – 380
L05 – 500
L07 – 700
Rated air ow [m/h]
Front panel type
1 – with a decorative plastic cover plate
Built-in control system
A – equipped with a control system
Air duct cross-section form
R – round
Solo Series