User`s manual

Fig. 7

CONTROLLER WIRING AND INSTALLATION

• The following is for the installation of one controller for one fan. Contact VENTS US if

you need to operate two or more fans with one controller.

• Refer to Figure 7 for electrical connections.

• Use 18 AWG or greater wire.

• It is important that the controller be properly grounded for e ective fan operation and

personnel safety.

• Always install the controller in sight of the fan it controls.

• CAUTION: Incorrectly installed fan(s) and/or controller(s) may damage the equipment

and void the warranty.

RED

SPEED CONTROLLER

BOX FOR SPEED CONTROLLER

(pre-installed by user)

TO POWER SOURCE

WHITE

From Fan

GREEN

BLACK

RED

~120 VAC 60 Hz