User`s manual

7
BUCKET FAN PARTS
The Bucket Fan can be angled if needed. All
it takes is a 13 mm socket wrench. Loosen the
bolts on either side of the fan, place at the angle
you want, then re-tighten the bolts.
1) Electrical junction box on protective grille.
2) Vibration absorbing mount
3) Metal case
4) Handle
5) Handle bolts
6) Casing
7) Sound-Insulation Layer
8) Air ow Straightener
9) Wing Head bolt
1
2
3
4
5
6
8
7
9
Fig. 4
Fig. 5
The destrati cator (see Fig. 5) consists of an
axial fan attached to the casing via the vibration
mounts. The destrati cator has a polymer coated
steel casing.
The destrati cator is equipped with a single-
phase asynchronous motor with an external
rotor and an axial impeller. The motor is
equipped with built-in thermal protection
enabling its automatic restarting and utilizes
rolling-element bearings. The motor protection
class is IP 44.
The Bucket Fan Whisper casing has special
perforation and a sound-insulating layer of
mineral wool to reduce the noise generated
by the axial fan. The Bucket Fan Whisper
destrati cator has a  ow straightener at the
discharge which ensures direct air  ow and
maximum air throw distance.
The destrati cator is mounted by means of the
bow bracket (Bucket Fan Whisper can be  xed
with 15° steps) as well as the mounting and the
safety cables with threaded joints.
Bucket Fan Whisper
Bucket Fan