Operating Instructions and Manual SAVE THESE INSTRUCTIONS: Read this instruction manual carefully before installation and use. BY Instamatic, i Keep this manual for future use in case it is needed. Model H1019 Ceiling Mount Heater WARNING: Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shack, or injury to Persons, P 3.4 5 PARTS LIST No.
PREPARATION . Unpack the cartons, Take aut the accessories pack from the carton of the heater body, Make sure the accessories listed in the Accessories Hack List are included. If anything is missing, ask the retailer immediately to provide it for you. 2. Prepare a philippics screw driver. 2. Read this instruction manual carefully before installation and use. Keep this instruction manual in a proper and safe place for future use i case needed.
IMPORTANT INSTRUCTIONS 16, When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1. Read all instructions before installing or using this heater, 2. Extra caution is necessary when any heater is Used by or near children or invalids and whenever the heater Is left operating sad unattended 3. Donor aerate any heater after it malfunctions.
GROUNDING INSTRUCTIONS This heater is for use on 120 volts. The cord has a plug as shown at A in Figure below. An adapter as shown at Cis available for connecting three-blade grounding-type plugs to two-slot receptacles. The green grounding lug extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box.The adapter should not be used if a three-slot grounded receptacle is available. ADAPTER METAL SCREW v 9.
