Technical Specifications
THSLE Equipped with halogen lighting. Not available with heat lamps.
THSLE
ISLAND LINER INSERT SPECIFICATIONS
550 CFM T200 Dual Blower
(Top View)
*Recommended mounting
height is for optimum
performance.
VP565 Standard Transition
(Included)
Transition Installed
(Side View)
Centerline
Of Hood
Centerline
Of Hood
¾”
Electrical
Vent Holes
2 ⁄”
5” x 16”
Exhaust
Opening
8” Transition
Opening 9”
Above Top
of Hood
9"
16"5"
8" Round 8" Round
12"
9"
U
L
CUS
R
Connection Diagram (36” - 48” Widths) Recommended
Mounting Height*
Electrical/Mechanical Specications For Blower Units
Model Volts Amps* Hz RPM
CFM
SP@0.0"
Equivalent CFM
•
CFM
SP@0.1"
CFM
SP@0.2"
CFM
SP@0.3"
Minimum Round
Duct Size
Sones
#
T200 Island Dual 115 2.9 60 1550 550 900 507 471 431 8" (50 in.
2
) 6.0
* Add 0.5 amp for each halogen light. Hood is available with halogen lights (one in each corner).
• BecausetheMagicLung
®
blowerusescentrifugalltrationratherthanconventionalbafeormeshlters,theMagicLung
®
blower can handle cooking equipment with higher cubic feet per minute (CFM) requirements and can deliver equivalent CFM much more
efcientlythanotherthanotherltrationsystems.WhencomparingtheMagicLung
®
withotherblowerunitsmadebyothermanufacturers,usethe“EquivalentCFM”.
# RatingsinaccordancewiththeStandardTestCodebytheEnergySystemsLaboratoryoftheTexasEngineeringExperimentStation.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Rev. 0412A

