Technical Specifications

ISLAND RANGE HOOD SPECIFICATIONS
IZTH Equipped with LED lighting. Not available with heat lamps. Available in stainless steel. Shown with
optional duct cover (sold separately). Optional duct covers available in standard and custom sizes. Pot
rail included.
1100 CFM T400 Cluster Blower
(Top View)
*Recommended mounting
height is for optimum
performance.
7"
21"
9"
16"5"
8" Round 8" Round
12" Round
12" Round
11 ¼"
8" Round 8" Round 8" Round
9 ¼"
23 ¼"
VP564 Transition
(Included)
Transition Installed
(Side View)
550 CFM T200 Dual Blower
(Top View)
VP565 Transition
(Included)
Transition Installed
(Side View)
U
L
CUS
R
NOTE: DUCT COVER EXTENDS 2”
INTO TOP OF HOOD.
Connection Diagram (54" - 66" Widths)
Connection Diagram (42" - 48" Widths)
Recommended
Mounting Height*
Electrical/Mechanical Specications For Blower Units
Model Volts Amps Hz RPM
CFM
SP@0.0"
Equivalent CFM
•
CFM
SP@0.1"
CFM
SP@0.2"
CFM
SP@0.3"
Minimum Round
Duct Size
Sones
#
T200 Island Dual 115 4.0 60 1550 550 900 507 471 431 8" (50 in.
2
) 6.0
T400 Island Cluster 115 7.5 60 1550 1100 1800 998 855 774 12" (113 in.
2
) 6.4
Hood is available with LED lights (one in each corner).
• BecausetheMagicLung
®
blowerusescentrifugalltrationratherthanconventionalbafeormeshlters,theMagicLung
®
blower can handle cooking equipment with higher cubic feet per minute (CFM) requirements and can deliver equivalent CFM much more
efcientlythanotherltrationsystems.WhencomparingtheMagicLung
®
withotherblowerunitsmadebyothermanufacturers,usethe“EquivalentCFM”.
# RatingsinaccordancewiththeStandardTestCodebytheEnergySystemsLaboratoryoftheTexasEngineeringExperimentStation.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Rev. 0516A
1 ½”
IZDC Island Duct Cover
Mounting Holes
(Top View)
⁄” Dia.
OPTIONAL
DUCT
COVER
OPTIONAL
DUCT
COVER
OPTIONAL
DUCT
COVER
OPTIONAL
DUCT
COVER
OPTIONAL
DUCT
COVER






























Centerline
of Hood
Electrical
6 ½”
Vent Holes
8” Transition
Opening
5” x 16”
Exhaust
Opening
Centerline
of Hood
Centerline
of Hood
8” Blower
Outlets
Centerline
of Hood
Electrical
6 ½”
10 ½”
Vent Holes
12” Transition
Opening