Technical Specifications















4 ½”
1”
Centerline
of Hood
3 ¼” x 10”
Outlet
Electrical
(Top View)
Wall Side
WALL MOUNT RANGE HOOD SPECIFICATIONS
GTH Equipped with halogen lighting. Not available with heat lamps. Available in stainless steel. Shown
with optional duct cover (sold separately). Optional duct covers available in standard and custom sizes.
Fixed rails included.
NOTE: DUCT COVER EXTENDS 4”
INTO TOP OF HOOD.
*Recommended mounting
height is for optimum
performance.
(Front View)
The VP521 transition is available
for top vent applications
at an additional charge.
GTH (36” Width Only)
Outlet
6"
U
L
CUS
R
7”
7 ½”
3 ¼”
10”
Connection Diagram Recommended
Mounting Height*
Electrical/Mechanical Specications For Blower Units
Model Volts Amps Hz RPM
CFM
SP@0.0"
Equivalent CFM
•
CFM
SP@0.1"
CFM
SP@0.2"
CFM
SP@0.3"
Minimum Round
Duct Size
Sones
#
K250 (Top Vent) 115 3.5 60 1550 250 375 223 220 190 7" (38 in.
2
) 7.4
Equipped with two halogen lights.
• BecausethePowerLung
®
blowerusescentrifugalltrationratherthanconventionalbafeormeshlters,thePowerLung
®
blowercanhandlecookingequipmentwithhighercubicfeetperminute(CFM)requirementsandcandeliverequivalentCFMmuchmore
efcientlythanotherltrationsystems.WhencomparingthePowerLung
®
withotherblowerunitsmadebyothermanufacturers,usethe“EquivalentCFM”.
# RatingsinaccordancewiththeStandardTestCodebytheEnergySystemsLaboratoryoftheTexasEngineeringExperimentStation.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Rev. 0516A
OPTIONAL
DUCT
COVER