Installation Guide

Rev. 0408A
Installation Instructions
Warming Shelf Assembly
The top back edge of the warming shelf assembly ts 1/2” to 1” behind the bottom
back edge of the hood. There are holes in the warming shelf assembly across the
top and down the sides. To install the warming shelf, place it against the wall in the
desired location, and mark the location of the mounting holes on the wall. Next, drill
and install wall anchors (for #8 screws) for the mounting holes. Finally, attach the
warming shelf assembly to the wall with #8 screws.
Model Number Width
WSO30 30”
WSO36 36”
WSO42 42”
WSO48 48”
WSO54 54”
WSO60 60”
WSO66 66”
WSO72 72”
15”
14”
10”
WIDTH