User Guide

34
Installer Setup
Auxiliary Output
The Premier Thermostat is equipped with a programmable auxiliary output.
This output can be configured to be controlled from a variety of sources.
Aux Output Polarity (setup step 54)
Specifies if the Auxiliary output will be Open (Normally Open) or Closed
(Normally Closed).
Aux Output ( setup step 55)
Specifies which source will control the Aux output.
Choices are:
Time - Uses the internal clock of the thermostat.
Temp - Uses one of three temperature sources.
External - The Auxiliary Output is controlled from an external source, such as a
a mobile app.
Economizer - Used to control an economizer, the Aux Output is active when
program is in any occupied time.
Auxiliary Output Programming By Time
If TIME is selected for the Aux Output, the following setup steps will appear:
Aux Output Days (setup step 56) - Specifies if the Aux Output will be single day
(1 DAY), weekday/weekend (5/1/1 DAY), or seven day (7 DAY) programmable.
Day Of Week To Program (setup step 57) - Specifies which day of week to
program.
Aux Output Start Time (setup step 58) - Specifies the time of each day when the
Aux output will turn on.
Aux Output Stop Time (setup step 59) - Specifies the time of each day when the
Aux output will turn off.
Copy (setup step 60) - This step only appears if Aux Output Days (Setup Step
59) is set for 7 programmable output days. Press COOLER and then OUTDOOR
to copy. Press WARMER and then OUTDOOR to program another day with a
different setting.