User Manual

At the thermostat, select the mode (Auto,
Heat Cool, or Off).
Adjust the setpoints to the desired settings.
Here, at the base station, press the
corresponding button for 5
seconds. The LED will flash for
5 minutes.
Within 5 minutes of pressing
the button on the base station,
press the link button on the receiver for 3 seconds. The LED on
the receiver will flash twice.
The base station will now remember your settings. You may
change these settings at anytime by repeating the above
steps.
Refer to owner’s manual for more details
1 1
4 4
77
RINGS
11
22
33
44
9vac Power
LINE
Page 10
Slide the RINGS switch to 7 rings if you have an answering machine or fax
machine connected. In this setting, the answering/fax machine may answer
the call first. If there is no answering machine connected, choose 1, 4, or 7
rings before the Base Station answers the call.
If there is an answering or fax machine in the house, it is highly recommended
that these items are connected to the Base Station. While the answering
machine plays your greeting, or after the fax tones stop, you may enter your
access code. After Comfort Call accepts your security access code, it will
bypass the answering or fax machine to control your thermostat.
Installation & Setup
Set the # of rings before the Base Station will pick up.
11
11
ANSWER MACH.,
FAX, OR PHONE
energy
comfort