User Guide

Table Of Contents

ACC0436

MODEL

©Venstar Inc. 02/08 - Patent Pending

P/N 88-772 Rev. 1

WIRELESS THERMOSTAT

TWO-WIRE KIT

THE WIRELESS THERMOSTAT TWO-WIRE KIT IS MADE UP OF ONE 24VAC 200mA TRANSFORMER AND ONE 24V RATED

RELAY. FOLLOW THE WIRING DIAGRAM BELOW TO CORRECTLY INSTALL THE TWO-WIRE KIT.

Black

24VAC

200mA

Adapter

T1100REC

Backplate

Brown

Orange

FURNACE

White

Red

RELAY

24V Relay

Furnace

Board

Install the supplied 24VAC 200mA adapter on the ‘C’ and ‘R’ terminals of the T1100REC

backplate. These wires do not have polarity and may be reversed without damaging

the Receiver.

Plug the 24VAC 200mA adapter into a 110-120v power source such as a normal home

wall outlet.

Install the supplied 24V relay on the ‘C’ (brown) and ‘W1/O/B’ (orange) terminals of the

T1100REC backplate. The Brown wire should connect to the ‘C’ terminal and the Orange

wire should connect to the ‘W1/O/B’ terminal.

Install the supplied 24V relay on the ‘W’ (white) and ‘R’ (red) terminals of the T1100REC

backplate. The White wire should connect to the ‘W’ terminal and the Red wire should

connect to the ‘R’ terminal.

PAGE 1
WIRELESS THERMOSTAT TWO-WIRE KIT MODEL ACC0436 THE WIRELESS THERMOSTAT TWO-WIRE KIT IS MADE UP OF ONE 24VAC 200mA TRANSFORMER AND ONE 24V RATED RELAY. FOLLOW THE WIRING DIAGRAM BELOW TO CORRECTLY INSTALL THE TWO-WIRE KIT. Install the supplied 24VAC 200mA adapter on the ‘C’ and ‘R’ terminals of the T1100REC backplate. These wires do not have polarity and may be reversed without damaging the Receiver. Plug the 24VAC 200mA adapter into a 110-120v power source such as a normal home wall outlet.