PROGRAMMER ACC0432 EZ Thermostat Programmer Allows quick and easy copying from one thermostat to the next Choose from clock, time period programming, or all data copy Battery backup keeps the clock and day of the week current Stores data from several models simultaneously Compatible with thermostat models: T1700, T1800, T1900, T2700, T2800 T2900 Consult VENSTAR for a complete list. OWNER’S MANUAL Venstar Inc.
Overview This unique accessory will allow you to copy stored information from a thermostat. Then the information may be loaded into other thermostats, without the need to manually enter each item. With the EZ Programmer your options are: Copy all data from a thermostat (time, day of week, time period programming, and advanced setup information). Load just the time and day of week to a thermostat. Load just the time period programming to a thermostat.
Overview The EZ Programmer has a unique location in its memory to store data from each thermostat model that it is compatible with. The EZ Programmer will automatically recognize the thermostat model that it is connected to and upload the correct data for that model. The EZ Programmer over writes only the existing data for the model being downloaded. All other models’ data is untouched.
Connection PLATINUM eries COMMERCIAL PROGRAMMABLE THERMOSTAT I2:00 74 Pm Su The accessory connector of the programmer is inserted into the accessory jack.
Connection - LED codes PLATINUM eries COMMERCIAL PROGRAMMABLE THERMOSTAT I2:00 74 Pm Su COOL AUTO 72 HEAT MODE HUMIDITY SET CLOCK FAN PROGRAM HOLIDAY OVERRIDE OUTDOOR After the accessory connector of the programmer is inserted into the accessory jack of a compatible thermostat: The LED will flash red a number of times based on the model of the thermostat it recognizes. Reconnect, if the red/green LED does not flash at all.
Buttons ALL TIME PERIOD CLOCK ONLY This button, when pressed, will copy (download) all the stored data from the connected thermostat to the programmer. The LED will turn red, then will turn green when complete. This button, when pressed, will copy (upload) the time period programming from the programmer to the connected thermostat. The LED will turn red, then turn green when complete. This button, when pressed, will copy (upload) the time & day of week from the programmer to the connected thermostat.
Operation - Copy All Data To upload All data programming: ALL This button, when pressed, will copy (upload) all the stored data from the programmer to the connected thermostat. The LED of the programmer will turn red, then turn green when copying is complete. To download All data: ALL This button, when pressed, will copy (download) all the stored data from the connected thermostat to the programmer. The LED of the programmer will turn red, then turn green when copying is complete.
Operation - Copy Time Period Programming To upload Time Period programming: This button, when pressed will copy (upload) all the time period data from the programmer to the connected thermostat. The LED of the programmer will turn red, then turn green when copying is complete.
Operation - Copy Time & Day of Week To upload Time & Day of Week: This button, when pressed, will copy (upload) the time & day of the week from the programmer to the connected thermostat. The LED of the programmer will turn red, then turn green when copying is complete. Note: If connected to a thermostat that does not have a clock, the programmer will not try to transfer the clock information. In this case the LED will not flash red.
Factory Defaults & Battery Installation/Replacement To completely erase all of the contents of the programmer and restore it to its factory default values, insert a paperclip into this hole and depress the small reset switch. Screw holding the battery cover. To replace the battery: Remove the screw holding the battery cover. Slide off the battery cover & replace it with a CR-2032, or equivalent battery. The internal clock will need to be reset after replacing the battery.
Table - Data Transferred, by Model Description T1700 T1800 T1900 Time of day Day of week F or C readout Programmable Auto Changeover Dead band 1 Dead band 2 Dead band 3 2nd stage timer 3rd stage timer 2nd stage turn off pt. Cycle limit Forced differential Fan off delay Back light Keypad Lock Prog. Fan runtime Prog. Fan start Prog. Fan stop Balance point # of occupied periods Security level Heat set limit Cool set limit Filter runtime set UV runtime set Humid. runtime set Time period info.
Warranty One-Year Warranty - This Product is warranted to be free from defects in material and workmanship.
