Specifications

Heat recovery core
Reversed door option
Access door
15.000”
[381]
RIGHT VIEW
Note: The access door can be removed from cabinet with only 2.000” [51] of clearance.
12.000”
[305]
Control box cover plat
e
FRONT VIEW
Note:
A minimum of 12.000” [305] clearance from any
obstruction is required for removal of the control box.
Strap mounting location
OA-E
RA-E
Access door
20.000”
[508]
20.000”
[508]
10.000”
[254]
8.000”
[203]
8.000”
[203]
4.000”
[102]
1.750”
[44]
Condensate drain
B
RIGHT VIEW
49.550”
[1,259]
5.125”
[130]
19.207”
[488]
Note: For units with the reversed door option, interior components will appear as a mirror image of the above diagram.
FRONT VIEW
For recirc
defrost only
Left Right
Back
Front
OA RASA
EA
Low voltage terminal strip
s
Control box
Reversed door option
EA-E
SA-E
41.240”
[1,047]
24.500”
[622]
8.000”
[203]
4.000”
[102]
3.530”
[90]
LEFT VIEW
A
8.000”
[203]
1.750”
[44]
10.000”
[254]
20.000”
[508]
2.750”
[70]
Power line input
Connection Table Connection Sizes
A Line voltage in 14 gauge wire nut
B Condensate drain fitting (2x) 3/4” MPT
HRV1200i (with recirculation defrost)
Poly core 247 lbs [112 kg] Aluminum core 257 lbs [117 kg] HM core 264 lbs [120 kg]
Notes:
Dimensions in [ ] are millimeters A minimum of 15.000” [381] clearance
from any obstruction is required for removal of heat recovery cores, fans, etc.
Figure B5: HRV1200i unit dimensional drawing (with recirculation defrost)
VCES-HRV-IOM-1C – HRV600i, HRV700i, HRV1200i
22