Specifications

12.000”
[305]
Control box cover plat
e
FRONT VIEW
15.000”
[381]
Access door
Heat recovery core
Reversed door option
RIGHT VIEW
20.000”
[508]
4.000”
[102]
2.750”
[70]
2.750”
[70]
1.800”
[46]
11.000”
[279]
20.000”
[508]
9.878”
[251]
24.500”
[622]
8.000”
[203]
8.000”
[203]
Access door
RA-E OA-E
Strap mount location
RIGHT VIEW
Condensate drain
B
34.000”
[864]
5.125”
[130]
19.207”
[488]
OA RA
Note:
For units with the reversed door option, interior components
will appear as a mirror image of the above diagram.
EA SA
FRONT VIEW
41.206”
[1,047]
40.326”
[1,024]
20.000”
[508]
5.715”
[145]
4.028”
[102]
11.325”
[288]
4.000”
[102]
8.000”
[203]
10.000”
[254]
SA-E EA-E
Power line input
Low voltage terminal strips
Control box
Reversed door option
LEFT VIEW
A
20.620”
[524]
14.250”
[362]
CD
BA
TOP VIEW
Left Right
Back
Front
Poly Core Aluminum Core HM Core PTS LBS Kg PTS LBS Kg PTS LBS Kg A 54 25 A 57 26 A 59 27
B 39 18 B 41 19 B 43 20 C 54 25 C 57 26 C 59 27 D 39 18 D 41 19 D 43 20
TOTAL 186 86 TOTAL 196 90 TOTAL 204 94
Connection Table Connection Sizes
A Line voltage in 14 gauge wire nut
B Condensate drain fitting (2x) 3/4” MPT
Note:
A minimum of 12.000” [305] clearance from any
obstruction is required for removal of the control box.
Note: The access door can be removed from the cabinet with only 2.000” [51] of clearance.
Notes:
Dimensions in [ ] are millimeters. Center of gravity Direction of airflow A minimum of 15.000” [381] clearance from any obstruction is required for removal of heat recovery cores, fans, etc. This model has a damper located on the outdoor intake connection. This damper will close during a frost control cycle or when the unit is placed in the ‘Off’ position with power maintained to the unit. This damper is not designed as a backdraft damper and will remain open if power is disconnected from the unit for any reason.
Figure B4: HRV1200i unit dimensional drawing (with exhaust only defrost)
VCES-HRV-IOM-1C – HRV600i, HRV700i, HRV1200i
21