Specifications

21.000”
[533]
Heat recovery core
Access door
RIGHT VIEW
1.875”
[48]
EA-E SA-E
20.750”
[527]
8.000”
[203]
10.750”
[273]
7.500” [191]
10.605”
[269]
12.104”
[307]
2.157”
[55]
Power line input
Low voltage terminal strips
8.000”
[203]
RIGHT VIEW
Condensate drain
B
A
2.000”
[51]
37.000”
[940]
24.736”
[628]
31.080”
[789]
51.000”
[1,295]
47.000”
[1,194]
8.000”
[203]
Defrost air opening
EA
OA RA
SA
3.625”
[92]
2.000”
[51]
FRONT VIEW
Control box
OA-E RA-E
2.000”
[51]
14.000”
[356]
1.875”
[48]
3.750”
[95]
40.500”
[1,029]
8.000”
[203]
12.250”
[311]
8.000”
[203]
15.250”
[387]
LEFT VIEW
10.000”
[254]
22.500”
[572]
AB
CD
TOP VIEW
LeftRight
Back
Front
Note:
The access door can be removed from cabinet with only 2.000” [51] of clearance.
Notes:
Dimensions in [ ] are millimeters. Center of gravity Direction of airflow A minimum of 21.000” [533] clearance from any obstruction is required for removal of heat recovery cores, fans and control box access. A minimum of 12.000” [305] clearance from any obstruction is required for power hook-up, low voltage remote connection and control panel access. Air is drawn in to the defrost air opening on top of the unit for recirculation defrost from the space or room in which the unit is mounted. If this air is not suitable for supply air or if a negative pressure is created and is not acceptable, then the defrost air opening should be ducted to a branch from the return air duct or from a suitable space.
Connection Table Connection Sizes
A Line voltage in 14 gauge wire nut
B Condensate drain fitting (2x) 3/4” MPT
PTS LBS Kg
A 34 15 B 67 30
C 36 16
D 74 34 TOTAL 211 95
Figure B3: HRV700i unit dimensional drawing
VCES-HRV-IOM-1C – HRV600i, HRV700i, HRV1200i
20