User manual
8 VELUX VELUX 9
Configuring control keypad KLI 110 in addition to existing remote
control KLR 100 (supplied with electrical skylight)
1
Copy and transmit system from remote control KLR 100 as de-
scribed in the user manual for KLR 100.
2
Press PRG button on control keypad KLI 110 for max 2 seconds to
receive system in the keypad. Reception can take up to 2 minutes.
LED flashes green slowly.
3
When LED in keypad flashes green quickly, select and transmit func-
tions of remote control KLR 100:
- Select products for configuration by choosing:
Menu
System Settings
Configure
- Select all relevant products. The individual product can be identi-
fied by pressing
on the remote control for a short period of time.
This will activate the product briefly.
4
Configure selected products in the keypad by pressing any operation
key for max 2 seconds. LED flashes green slowly for a few seconds.
When configuration has been completed, LED is green for 4 seconds.
If configuration has failed, LED is red for four seconds.
2
1
PRG
3
4
max 2 sec
max 2 sec
P1
P2
Enter Back
Register product
Copy system
Security key
Conî‚¿gure
SYSTEM SETTINGS