Use and Care Manual

• Slide the switch to the RESET position and
hold for a minimum of 10 seconds.
Note: the shade will either humm or start to
move, continue to hold it in the reset position
for the 10 second duration.
• Next, you will need to PAIR with the remote:
• ON THE REMOTE: Within 10 minutes of
resetting the shade:
• Press the PAIR button for 1 second
• Then, press the STOP (center) button on
that remote for 1 second
• Lastly, press the DOWN button for 1 second.
Issue: “I have multiple solar-powered shades
and multiple remote controls and I want to just
use one main remote to control all of them.”
Resolution: You’ll need to synchronize all of
your solar-powered shades with one main
remote control.
STEPS TO TAKE:
Option 1:
• All shades must already be controlled by a
remote.
• Press the GEAR button for 1 second on all
remotes EXCEPT the MAIN remote (a).
• Press the PAIR button for 1 second on the
MAIN remote (a).
• All Shades should be paired to the MAIN
remote (a).
04 Troubleshooting
11