Instruction Manual

9
• Push the knob. Then rotate it to set the run time of the intermittent mode (minutes/seconds).
Note: select NNSS to disable the function.
• Push the knob. Then rotate it to set the pause time of the intermittent mode (minutes/seconds).
The stirring function will be interrupted cyclically. The run time and the pause time should both be set.
Note: select NNSS to disable the function.
• Push the knob. Then rotate it to set the timer (hours/seconds).
After the timer has elapsed, the stirring will be stopped and the display will show End.
Note: select HHnn to disable the function.
• Push the knob or wait 10 seconds to confirm.
Dedicated blinking leds show the active functions.
Note: each function can be set individually or in combination with the others.