Specifications

Subwoofer Cabinet Back
[6]
WiConnect User’s Manual
SET UP
A. CHANNEL: Select broadcast
frequency. This CHANNEL selection
must match CHANNEL selection on
the transmitter.
B. LFE INPUT: Optional wired
connection to receiver, if not
using the wireless connection.
C. PHASE: Invert the phase of the
subwoofer, if it blends better with
the satellite speakers.
D. LOW-PASS CROSSOVER: Select the
upper frequency to cut-off the audio
signal to the subwoofer output.
E. ACTIVE:
• Solid yellow when ON/ACTIVE using
wireless connection.
• Flashing yellow and green when
ON/ACTIVE , but no RF signal.
• Solid Red when in ON/ST
AND BY.
• Subwoofer goes to STAND BY if
no audio signal is present for
12 minutes.
F. VOLUME: Adjust subwoofer volume.
G. POWER: Switch power ON and OFF.