Installation manual

7
. Push the backside of the basket flange flush with the ceiling material, and tighten the
four screws on the basket engaging the clamps. The four screws should be hand
t
ightened, or torqued to 4 inch pound.
8. Carefully push the aluminum grille into the groove on the grille basket. Ensure that
the flange and the grille edge are flush.
Figure 4. Push the SC-600 In-Ceiling Grille into the grille basket.
New Construction
1.
Designate a suitable location for for the installation of the V
elodyne in-ceiling subwoofer,
during the framing constr
uction. Mark the driver location by stapling the mud ring
template across the ceiling beams centered at the designated location.
2. Using the cut-out template, cut a hole in the ceiling material to match the mud
ring location.
3. Install the sheet r
ock. Do not r
emove the mud ring.
4.
Follow the “Existing Construction Installation” steps 5-8 to complete the installation
of the grille.
5
.
www.velodyne.com
SC-ICG (In-Ceiling Grille) User’s Manual