SC-ICG (In-Ceiling Grille) SubContractorTM Series INSTALLATION MANUAL
Caution IMPORTANT SAFETY INSTRUCTIONS Caution To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel. The lightning flash with arrowhead symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Re C os ntgorrai tnugl D a teifa o nusl t s Congratulations on your purchase of a Velodyne in-ceiling grille. The Velodyne in-ceiling grille is for use with the SC-IF/IC (In-Floor/In-Ceiling) or SC-600 IF/IC subwoofers. Read and follow this instruction manual to ensure safe and proper installation. Prior to Installation Please unpack the grille carefully. future use.
I n s ta l l a t i o n I n s t r u c t i o n s Retrofit 1. Determine the center position for the subwoofer installation location. 2. Puncture a small hole through the ceiling material at the corresponding driver center location. Figure 1. Position the SC-600 In-Ceiling template on desired installation location. 3. Center the SC-ICG cut-out template to the hole created in the previous step. . www.velodyne.
4. Cut the ceiling material along the solid line noted on the template, following the outer diameter of the circular template. Figure 2. Cut ceiling material along specified solid cut-line. . www.velodyne.
5. Insert the paint template into the in-ceiling grille basket. Paint the grille basket flange to match decor. 6. After the paint has dried, remove the paint template and insert the in-ceiling grille basket into the hole in the ceiling material. Figure 3. Install the basket flange into the cut-out ceiling material. . www.velodyne.
. Push the backside of the basket flange flush with the ceiling material, and tighten the four screws on the basket engaging the clamps. The four screws should be hand tightened, or torqued to 4 inch pound. 8. Carefully push the aluminum grille into the groove on the grille basket. Ensure that the flange and the grille edge are flush. Figure 4. Push the SC-600 In-Ceiling Grille into the grille basket. New Construction 1.
Specifications . SPECIFICATIONS SC-600 In-Ceiling Grille Frame High strength ABS plastic Grille Paintable aluminum alloy Grille Dimensions 12” Cut-out Dimensions 11” Warranty (parts/labor) Five years (for normal usage) Shipping Weight (approx.) 5 lbs. (2.3 Kg) www.velodyne.
LIMITED WARRANTY - U.S. AND CANADA ONLY VELODYNE ACOUSTICS, Inc. (“VELODYNE”) warrants all electronics for a period of three years, drivers for a period of five years, and full range speakers for a period of five years. All VELODYNE products have a warranty from the date of purchase against defects in materials and workmanship subject to the following conditions: 1.
Velodyne Products 120V DD ® Series DD-10 DD-12 DD-15 DD-18 Digital Drive 1812 Signature Edition DEQ-R Series DEQ-8R DEQ-10R DEQ-12R DEQ-15R DLS™-R Series DLS -3500R DLS -3750R DLS -4000R DLS -5000R Impact Series Impact - Mini Impact -10 Impact -12 230V MicroVee™ ® MiniVee ® MiniVee 10 SMS™-1 SPL-R ® Series SPL-800R SPL-1000R SPL-1200R SPL-1500R SubContractor™ Series SC-1250 SC-10 SC-12 SC-15 SC-IW SC-IF/IC SC-600 Amp SC-600 IW SC-600 IF/IC DD ® Series DD-10 DD-12 DD-15 DD-18 Digital Drive 1812 Signature
Velodyne Acoustics, Inc. 345 Digital Drive Morgan Hill, CA 95037 408.465.2800 voice 408.779.9227 fax 408.779.9208 service fax www.velodyne.com Service E-mail: service@velodyne.com Product E-mail: help@velodyne.com Technical E-mail: techhelp@velodyne.com . 63-IC12G Rev A JUL08 www.velodyne.
