Installation manual

22 6195-2201
Phonebook commands
+CPBS – Select phonebook memory storage
This command selects phonebook memory storage. The available phonebooks are
the ADN (SIM), FDN (SIM fixdialling, restricted phonebook), and MSISDN
(SIM own numbers) phonebooks.
Application to GSM AT+CPBS= ”SM” Select ADN phonebook
GSM to application OK ADN phonebook is selected
Application to GSM AT+CPBS=? Possible values
GSM to application +CPBS: (”SM”,”FD”,”ON”) ADN, FDN, MSISDN
OK Phonebooks supported
Application to GSM AT+CPBS? Status
GSM to application +CPBS: ”SM”,10,20 ADN phonebook selected,
OK 10 used locations, 20 locations
available
The ADN phonebook could not be selected is FDN is active.
+CPBR – Read phonebook entries
This command returns phonebook entries for a location range from the current phonebook
memory storage selected with +CPBS.
Application to GSM AT+CPBR=? Test command
GSM to application +CPBR: (1-50), 20,10 50 locations (from 1 to 50),
OK max length of 20 for phone
10 characters max for the
associated text
Application to GSM AT+CPBR=12,14 Read entries from 12 to 14
GSM to application +CPBR: 12,”112”,129, Display locations 12,13,14
”Emergency” +CPBR: 13, with Location, Number,
”[phone]”,145, ”Fred” Type (TON/NPI), Text
+CPBR: 14, ”0146290808”,
129, ”Zazi”
OK
Application to GSM AT+CPBR=10 Read entry 10
GSM to application +CPBR:10,”0146290921”, Display location 10
129,”Rob”
OK
Application to GSM AT+CPBR=52 Read entry 52 (wrong)
GSM to application +CME ERROR: 21 Invalid index