User manual

Chapter 4 Tutorial 4 - 51
Inserting cues
If you insert a cue into this sequence, Record and Track produce differ-
ent results. Record saves changes only in the cue you insert; Track
saves the changes you make and tracks them through the following
cues.
The following keys were pressed to release captured channels and play
back cue 1. With cue 1 in a fader pair, channel 4 is added at 50 percent.
The new look is inserted as cue 1.1.
[Stage] [Rel] [Rel] Release captured channels.
[Cue] [1] [Go] Play back cue 1.
[Chan] [4] [At] [5][0] Add channel 4 at 50 percent.
[Record] [1][.][1] [Enter] Inserts new look as cue 1.1.
Figure 4 displays the result inserting the cue using [Record]. Notice the
new channel is not added to the cues that follow it.
Cue 1 Cue 1.1 Cue 2 Cue 3 Cue 4 Cue 5
Channel 1 50 50 FF FF 25 00
Channel 2 FF FF FF 00
Channel 3 FF FF 00
Channel 4 50 00 FF
Channel 5
Figure 4.
Note that MicroVision FX enters a level of 00 percent for channel 4 in
cue 2. This downfades the channel when cue 2 is played.
When you insert a cue with [Track] new channels track through the cues
after it until MicroVision FX encounters a cue with a level previously
recorded for that channel.